Reviewed by canoehat from Harrisonburg, VA on Monday, January 30, 2012
I used this for full-size curtains covering the sliding doors to my deck. Easy to install with sturdy mounting hardware included. Classy looking and sturdy. Outstanding value—most curtain rods in stores at this pice point are junk compared to this.
Based on 39 reviews:Overall:
Your search for "" returned reviews for Casa-by-Versailles-42-112-Adjustable-Curtain-Rod-Set-Metal
Reviewed by Nell from Colorado on Saturday, January 31, 2015
I bought two rods and had to fiddle with them a bit to fit each window. One was a bit short without the extension and with the extension it was a bit long. The screws were so soft they stripped easily even though there were pilot holes drilled for them. (I put them into wood). But the hangers are strong enough and there are extras to use in the middle if necessary.
Sierra trading post will send you instructions. Basically, the "small" rod goes in the middle of the "big" rods. Take the finial off the small diameter rod, attach it to the "extra" rod (one end will have a black plug on it with a hole in the middle), now the small diameter rod is the middle extension rod. So easy, if there were directions. I got them emailed from Sierra!!
Answered on 2/10/2015 7:30:27 PM by Cathy from Vermont
Unscrew knob from smaller diameter rod. Screw knob onto loose large diameter rod. Slide loose large diameter rod over free end of small diameter rod. You now have a three piece rod ( large diameter / small diameter / large diameter)that tightens at any length by twisting, like a shower curtain rod.
Answered on 2/10/2015 8:08:18 PM by Gingermesiah from Utah
With my significant other, we put our curtains on the rods and then held the rod holders in place along with a bubble level, made sure the curtains covered the window the length desired, made sure the rod was level and then used a marker inside the holes. As far as placement of the holders we just measured up 2 inches and over 2 inches from the corner of the window. Centered the middle holder, 2 inches up. I'm sure you can find general instructions on line as well. Good luck!
Answered on 10/27/2014 6:39:11 PM by WAScum from Anacortes, WA