Primus EtaPower Titanium Non-Stick Cook Pot - 1.7L

This pot and its 2.1L brother worked well for us on a seven day canoe trip in the Boundary Waters Canoe Area Wilderness and on a five day backpack in Glacier NP. To make the pots work on our MSR stoves (SimmerLite and WindPro)we used a Dremel tool to cut away the flat ring around the heat exchanger at the points where the stove's pot support contacted it. This made the pot make firm contact with the stove's pot support and put the burner up inside the heat exchanger. The two pots nest well. Good value and good performance.

Saves fuel. My boiling times are 30-60 seconds less than with my old stainless steel pot. As mentioned, this is an aluminium pot with a non-stick coating inside. There is a metal ring welded to the bottom so that the pot can rest on a regular stove. My stove's supports are relatively small in diameter, so I have to align the supports so that they fit in between the fins (takes an extra second or two). I wish it came with an insulated bag like with the etapower stove set. Much more economical than the j-boil system.

This pot makes the stove so much more efficient it really does what it claims

As I said, it does heat-up fast, thus saving fuel. If that is not an issue then you could do better in terms of weight and cost. Also, quality is inconsistent. Sent first one back with chip in coating. Second one isn't perfect but I'll keep.

The construction is very solid, and the heat exchanger fins at the bottom are well protected. As with all non-stick coatings, you need to be careful when cooking and cleaning. That said, I plan to take care of this and use it for many decades to come. It's light - and stable, a really good product.